PriceList for Tooth Bar For Loader Bucket - PC300/207-70-14151RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng Detail:
PC300 Bucket Teeth (Wear-resistant Type)
| No. | 207-70-14151RC |
| Applicable model | Komatsu PC220/PC240LC/PC270/PC300; Sumitomo 30; Sunward; Lovol 260E |
| Product weight (kg/pc) | 9.9 |
| Production status | In production |
● Inner cavity diameter: 12.5CM
● Width: 12.5CM
● Inner cavity length: 11CM
● Height: 11.42CM
● Inner cavity width: 9.2CM
● Length: 33CM
PC300 Bucket Teeth (Light Type)
| No. | 207-70-14151RC |
| Applicable model | Komatsu PC220/PC240LC/PC270/PC300Sumitomo 30; Sunward; Lovol 260E |
| Product weight (kg/pc) | 8 |
| Production status | In production |
● Inner cavity diameter 12CM
● Width: 12.5CM
● Inner cavity length: 9CM
● Height: 11.6CM
● Inner cavity width: 8.5CM
● Bore diameter: 3.2CM
● Length: 27CM
Xuan Sheng Forged Bucket Teeth
High abrasion resistance
Higher wear resistance for the same model of bucket teeth.
Sharper
Reasonable tooth design makes teeth sharper, increases wear ratio and reduces residual part.
Lower cost of use
Lower loss per unit hour (lower cost of use).
Differences Between Cast Bucket Teeth And Xuan Sheng Bucket Teeth
| Cast bucket teeth | Xuan Sheng bucket teeth | Result | |
| Weight | 11.55KG | 11.6KG | Basically the same |
| Accumulative service life | 85H | 120H | Service life is extended by 41.2% |
| Loss per unit hour (RMB yuan) | 1.94 | 1.375 | Cost is reduced by 29% |
Company Profile
Product detail pictures:
Related Product Guide:
With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for PriceList for Tooth Bar For Loader Bucket - PC300/207-70-14151RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng, The product will supply to all over the world, such as: Turkey, Curacao, Berlin, We have got constantly insisted on the evolution of solutions, spent good funds and human resource in technological upgrading, and facilitate production improvement, meeting the wants of prospects from all countries and regions.
By Fanny from Puerto Rico - 2018.12.22 12:52
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Heloise from Egypt - 2017.11.12 12:31
