Chinese wholesale Bucket Tooth Forging Parts - PC200/205-70-19570RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng Detail:
PC200 Bucket Teeth
| No. | 205-70-19570RC |
| Applicable model | Komatsu PC130/ PC160LC/ PC200/ PC200LC/ PC210/ PC210LC/ PC215/ PC215LC/ PC215HD; Sumitomo 210/ 220; Shantui old model excavator 200/210; SDLG 6225F; Liugong 922 |
| Product weight (kg/pc) | 5.9 |
| Production status | In production |
● Inner cavity diameter: 11.3M
● Width: 10.2CM
●Inner cavity length: 7.3CM
●Height: 11CM
●Inner cavity width: 8.1CM
●Length: 25.2CM
Why Do We Make: Forged bucket teeth The Products Comparison Conclusion.
- Cast bucket teeth
01
Higher production technology level than cast bucket teeth, stable quality;
02
Decided production shape, good for mass production
03
Improvable performance index, tooth shape design and reducing customer cost by more than 30%.
04
Automatic assembly line production, less manual labor, low electricity consumption reduced by 50%, qualified less pollution production promoted by government.
05
Intensive plant area, efficient infrastructure investment
- Cast bucket teeth
01
Mature products but unstable quality.
02
Complex shapes available
03
Limited by process craft, the production is close to the economic limit for high wear resistance so that hard to be improved.
04
High electricity, labor costs and decentralized plant size, inefficient landuse.
05
Lots of dust, solid waste, considered as pollution industry.
Bucket Teeth User Guide
The types of bucket teeth should be selected based on the working environment, and the right teeth shape can reduce the digging resistance and save fuel. When the sharp part of the bucket teeth is worn severely, the force required for the excavator to complete the cutting action will be increased greatly, resulting in greater fuel consumption and affecting work efficiency. Therefore, it is necessary to replace the bucket teeth with new ones in time when you check serious loss of the bucket teeth.
During the daily maintenance of the excavator, take a few minutes to check the bucket teeth every day. You should mainly check the bucket teeth for wear. Replace with a new sleeve in case of serious wear. In addition, you should kick the bucket teeth to check whether the bucket teeth are stable, and if the bucket teeth are loose, you should tighten them immediately.
Product detail pictures:
Related Product Guide:
Every member from our high efficiency sales team values customers' needs and business communication for Chinese wholesale Bucket Tooth Forging Parts - PC200/205-70-19570RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng, The product will supply to all over the world, such as: Sierra Leone, Guinea, Spain, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers, common development and create a better future.
By Nelly from Nicaragua - 2017.06.19 13:51
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Eartha from Hanover - 2017.12.02 14:11
